ZL type nylon rod coupling

The ZL type coupling has the performance of compensating the relative deviation of the two shafts. It is suitable for medium and high power transmission, and is not suitable for working parts that require vibration reduction and strict noise control.

The elastic pin gear coupling is a pin made of a number of non-metallic materials, which is placed in the mating hole between the two halves of the coupling and the inner surface of the outer ring, and the two halves are connected through the pin to transmit torque. Shaft coupling.The elastic pin gear coupling has good compensation performance for axial, radial and angular axis deviation, good vibration reduction performance, simple structure, stable operation, no noise, no lubrication, convenient maintenance, simple assembly and disassembly, and process Good performance, low cost, can be derived into a variety of structural situations, good versatility, wide application range, and easy to promote.

Elastic pin gear couplings The centralized standard elastic coupling has the advantages of different structures, such as the advantages of the plum-shaped elastic coupling: the elastic element is squeezed, the structure is simple, and the performance is high.Overcome the shortcomings of the plum blossom elastic coupling: When changing the elastic element, the half coupling is moved. Although the double flange plum blossom type elastic coupling can be replaced without moving the half coupling, the elastic element can be replaced, but the structure is complicated and the cost is high. , Increase the mass and moment of inertia, the application range is affected, when the same torque is transmitted, the radial size is much smaller than that of the elastic sleeve pin coupling, the mass is lighter, and the moment of inertia is small.

ZL type coupling coupling has the following characteristics:

(1) The transmission torque is large. At the same torque, the rotation diameter is mostly smaller than that of the gear coupling, and the volume is lighter. It can partially replace the gear coupling.

(2) Compared with gear couplings, it has simple structure, fewer components, and is more convenient to manufacture. It does not require gear processing machine tools.

(3) Easy maintenance and long service life. The nylon pin can be replaced by removing the baffle.

(4) The nylon pin is a self-lubricating material and does not need lubrication, which not only saves lubricating oil, but also purifies the working environment.

(5) Poor vibration reduction and high noise.

江苏ZL type nylon rod coupling　Shandong ZL type nylon rod coupling