What are the ways to fix the coupling?

How to fix the coupling:

1. Fastening bolt type: This low-cost type is a traditional fixing method.However, direct contact between the front end of the bolt and the end center may cause damage to the shaft or difficulty in disassembly.

2. Clamping type: Use the tightening force of countersunk bolts to shrink the slit and clamp the shaft tightly.It is convenient to fix and disassemble, and will not damage the axis of Qiancheng.

3. Separation type: The characteristic of the separation type is that it has a separate shaft sleeve, which can be fixed and disassembled without moving the device.

4. Semi-separable type: One side of this type is a clamping type bushing, and the other side is a separate type bushing. First fix one side of the shaft to the clamping type shaft sleeve, and then install the shaft center at the device end. In the separable bushing.

5. Keyway type: This type is the same as the fastening bolt type. It is a traditional fixing method, suitable for higher torque transmission. To prevent axial movement, it is usually used together with the fastening bolt type and the clamping type.