ZL type elastic pin gear coupling
ZL-type elastic pin gear coupling is a pin made of a number of non-metallic materials, which is placed in the mating hole between the two halves of the coupling and the inner surface of the outer ring. Half coupling is connected.
The following features of the coupling device:
(1) The transmission torque is large. At the same torque, the rotation diameter is mostly smaller than that of the gear coupling, and the volume is lighter. It can partially replace the gear coupling.
(2) Compared with gear couplings, it has simple structure, fewer components, and is more convenient to manufacture. It does not require gear processing machine tools.
(3) Convenient maintenance and long service life. The nylon pin can be replaced by removing the baffle.
(4) The nylon pin is a self-lubricating material and does not need lubrication, which not only saves lubricating oil, but also purifies the working environment.
Technical parameters of ZL type elastic pin gear coupling:
model | Nominal torque Tn N·m | Permissible speed [n] r/min | Axle hole diameter d1, d2 ㎜ | Shaft hole length L | D ㎜ | D1 ㎜ | B ㎜ | S ㎜ | Moment of inertia kg·㎡ | Mass kg | |
Y | J1 | ||||||||||
Mm | |||||||||||
ZL1 | 100 | 4000 | 12 | 32 | - | 78 | 40 | 42 | 2.5 | 0.001 | 1.438 |
14 | |||||||||||
16 | 42 | 30 | 1.560 | ||||||||
18 | |||||||||||
19 | |||||||||||
20 | 52 | 38 | 1.634 | ||||||||
22 | |||||||||||
24 | |||||||||||
ZL2 | 250 | 4000 | 16 | 42 | - | 90 | 50 | 50 | 2.5 | 0.002 | 2.451 |
18 | |||||||||||
19 | |||||||||||
20 | 52 | 38 | 2.635 | ||||||||
22 | |||||||||||
24 | |||||||||||
25 | 62 | 44 | 2.723 | ||||||||
28 | |||||||||||
30 | 82 | 60 | 3.321 | ||||||||
32 | |||||||||||
ZL3 | 630 | 4000 | 25 | 62 | 44 | 118 | 65 | 70 | 3 | 0.009 | 5.592 |
28 | |||||||||||
30 | 82 | 60 | 6.202 | ||||||||
32 | |||||||||||
35 | |||||||||||
38 | |||||||||||
40 | 112 | 84 | 0.010 | 6.466 | |||||||
42 | |||||||||||
ZL4 | 1600 | 4000 | 40 | 112 | 84 | 158 | 90 | 90 | 4 | 0.38 | 15.094 |
42 | |||||||||||
45 | |||||||||||
48 | |||||||||||
50 | |||||||||||
55 | |||||||||||
56 | |||||||||||
60 | 142 | 107 | 0.39 | 13.998 | |||||||
ZL5 | 4000 | 4000 | 50 | 112 | 84 | 192 | 120 | 90 | 4 | 0.088 | 24.154 |
55 | |||||||||||
56 | |||||||||||
60 | 142 | 107 | 0.095 | 26.630 | |||||||
63 | |||||||||||
65 | |||||||||||
70 | |||||||||||
71 | |||||||||||
75 | |||||||||||
80 | 172 | 132 | 0.098 | 24.686 | |||||||
ZL6 | 6300 | 3300 | 60 | 142 | 107 | 230 | 130 | 112 | 5 | 0.183 | 35.099 |
63 | |||||||||||
65 | |||||||||||
70 | |||||||||||
71 | |||||||||||
75 | |||||||||||
80 | 172 | 132 | 0.188 | 34.081 | |||||||
85 | |||||||||||
90 | |||||||||||
ZL7 | 10000 | 2900 | 70 | 142 | 107 | 260 | 160 | 112 | 5 | 0.344 | 51.941 |
71 | |||||||||||
75 | |||||||||||
80 | 172 | 132 | 0.369 | 56.419 | |||||||
85 | |||||||||||
90 | |||||||||||
95 | |||||||||||
100 | 212 | 167 | 0.387 | 56.477 | |||||||
110 | |||||||||||
ZL8 | 16000 | 2500 | 80 | 172 | 132 | 300 | 190 | 128 | 6 | 0.740 | 85.388 |
85 | |||||||||||
90 | |||||||||||
95 | |||||||||||
100 | 212 | 167 | 0.798 | 90.626 | |||||||
110 | |||||||||||
120 | |||||||||||
125 | |||||||||||
130 | 252 | 202 | 0.800 | 82.060 | |||||||
ZL9 | 25000 | 2300 | 90 | 172 | 132 | 335 | 220 | 150 | 7 | 1.232 | 112.639 |
95 | |||||||||||
100 | 212 | 167 | 1.361 | 127.551 | |||||||
110 | |||||||||||
120 | |||||||||||
125 | |||||||||||
130 | 252 | 202 | 1.427 | 125.049 | |||||||
140 | |||||||||||
150 | |||||||||||
ZL10 | 31500 | 2100 | 100 | 212 | 167 | 355 | 245 | 152 | 8 | 1.936 | 160.704 |
110 | |||||||||||
120 | |||||||||||
125 | |||||||||||
130 | 252 | 202 | 2.080 | 163.936 | |||||||
140 | |||||||||||
150 | |||||||||||
160 | 302 | 242 | 2.163 | 158.128 | |||||||
170 | |||||||||||
ZL11 | 40000 | 2000 | 110 | 212 | 167 | 380 | 258 | 172 | 8 | 2.511 | 177.660 |
120 | |||||||||||
125 | |||||||||||
130 | 252 | 202 | 2.721 | 189.608 | |||||||
140 | |||||||||||
150 | |||||||||||
160 | 302 | 242 | 2.868 | 187.832 | |||||||
170 | |||||||||||
180 | |||||||||||
ZL12 | 63000 | 1700 | 130 | 252 | 202 | 445 | 290 | 182 | 8 | 5.103 | 263.398 |
140 | |||||||||||
150 | |||||||||||
160 | 302 | 242 | 5.456 | 272.432 | |||||||
170 | |||||||||||
180 | |||||||||||
190 | 352 | 282 | 5.597 | 262.926 | |||||||
200 | |||||||||||
ZL13 | 100000 | 1500 | 150 | 252 | 202 | 515 | 345 | 218 | 8 | 10.613 | 399.676 |
160 | 302 | 424 | 11.597 | 447.44 | |||||||
170 | |||||||||||
180 | |||||||||||
190 | 352 | 282 | 12.286 | 459.670 | |||||||
200 | |||||||||||
220 | |||||||||||
240 | 410 | 330 | 12.163 | 410.282 | |||||||
ZL14 | 125000 | 1400 | 170 | 302 | 242 | 560 | 390 | 218 | 8 | 17.334 | 567.547 |
180 | |||||||||||
190 | 352 | 282 | 18.798 | 612.253 | |||||||
200 | |||||||||||
220 | |||||||||||
240 | 410 | 330 | 708 | ||||||||
250 | |||||||||||
ZL15 | 160000 | 1300 | 190 | 352 | 282 | 590 | 238 | 245 | 10 | 33.4 | 768 |
200 | |||||||||||
220 | |||||||||||
240 | 410 | 330 | |||||||||
250 | |||||||||||
260 | |||||||||||
280 | 470 | 380 | |||||||||
300 | |||||||||||
ZL16 | 250000 | 1000 | 220 | 352 | 282 | 695 | 490 | 265 | 10 | 55.993 | 1169 |
240 | 410 | 330 | |||||||||
250 | |||||||||||
260 | |||||||||||
280 | 470 | 380 | |||||||||
300 | |||||||||||
320 | |||||||||||
340 | 550 | 450 | |||||||||
ZL17 | 315000 | 950 | 240 | 410 | 330 | 770 | 550 | 285 | 10 | 85.646 | 1474.247 |
250 | |||||||||||
260 | |||||||||||
280 | 470 | 380 | 91.753 | 1534.891 | |||||||
300 | |||||||||||
320 | |||||||||||
340 | 550 | 450 | 96.160 | 1503.669 | |||||||
360 | |||||||||||
380 | |||||||||||
ZL18 | 400000 | 850 | 250 | 410 | 330 | 860 | 605 | 300 | 13 | 131.549 | 1847.739 |
260 | |||||||||||
280 | 470 | 380 | 141.955 | 1980.153 | |||||||
300 | |||||||||||
320 | |||||||||||
340 | 550 | 450 | 151.599 | 2011.597 | |||||||
360 | |||||||||||
380 | |||||||||||
400 | 650 | 540 | 157.930 | 1964.523 | |||||||
420 | |||||||||||
ZL19 | 630000 | 750 | 280 | 470 | 380 | 970 | 695 | 322 | 14 | 244.767 | 2743.400 |
300 | |||||||||||
320 | |||||||||||
340 | 550 | 450 | 266.661 | 2890.260 | |||||||
360 | |||||||||||
380 | |||||||||||
400 | 650 | 540 | 288.303 | 2987.456 | |||||||
420 | |||||||||||
440 | |||||||||||
450 | |||||||||||
ZL20 | 1000000 | 650 | 320 | 470 | 380 | 1158 | 800 | 355 | 15 | 484.727 | 3867.934 |
340 | 550 | 450 | 531.501 | 4308.732 | |||||||
360 | |||||||||||
380 | |||||||||||
400 | 650 | 540 | 580.315 | 4599.492 | |||||||
420 | |||||||||||
440 | |||||||||||
450 | |||||||||||
460 | |||||||||||
480 | |||||||||||
500 | |||||||||||
ZL21 | 1600000 | 530 | 380 | 550 | 450 | 1440 | 1020 | 360 | 18 | 1353.544 | 7178.032 |
400 | 650 | 540 | 1512.413 | 8157.832 | |||||||
420 | |||||||||||
440 | |||||||||||
450 | |||||||||||
460 | |||||||||||
480 | |||||||||||
500 | |||||||||||
530 | 800 | 680 | 1691.025 | 8593.602 | |||||||
560 | |||||||||||
600 | |||||||||||
630 | |||||||||||
ZL22 | 2000000 | 500 | 420 | 650 | 540 | 1520 | 1100 | 405 | 19 | 2079.058 | 9674.878 |
440 | |||||||||||
450 | |||||||||||
460 | |||||||||||
480 | |||||||||||
500 | |||||||||||
530 | 800 | 680 | 2351.440 | 10555.786 | |||||||
560 | |||||||||||
600 | |||||||||||
630 | |||||||||||
670 | 900 | 780 | 2394.865 | 9837.026 | |||||||
710 | |||||||||||
750 | |||||||||||
ZL23 | 2500000 | 460 | 480 | 650 | 540 | 1640 | 1240 | 438 | 20 | 3130.426 | 11891.545 |
500 | |||||||||||
530 | 800 | 680 | 3632.924 | 13811.197 | |||||||
560 | |||||||||||
600 | |||||||||||
630 | |||||||||||
670 | 900 | 780 | 3815.088 | 13496.393 | |||||||
710 | |||||||||||
750 | |||||||||||
800 | 1000 | 880 | 3827.698 | 12482.437 | |||||||
850 | |||||||||||
Note: 1 The moment of inertia and mass are calculated based on the Y/Y shaft hole combination type and the small shaft hole diameter. 2 Short-time overload shall not exceed 2 times of the nominal torque Tn. 3 Working environment temperature -20~+70℃. |
江苏ZL type elastic pin gear coupling Shandong ZL type elastic pin gear coupling
-
How to analyze the cause of damage to the elastic pin coupling?And the classification of elastic pin couplingsElastic pin coupling, generally elastic pin coupling, nylon rod pin coupling, the former is...Take you to understand commonly used elastic couplingsCommonly used elastic couplings are divided into two types of elastic sleeve pin couplings and elastic pin couplings...
-
Rigid movable couplingTypes of rigid removable couplings (couplings without elastic elements): Oldham...Classification and performance of couplingsCouplings are also called couplings.Used to firmly connect the driving shaft and the driven shaft in different mechanisms...
-
The characteristics and maintenance methods of gear couplingGear coupling is a kind of removable rigid coupling.It uses internal and external tooth meshing to realize the torque rotation and movement transmission between the two halves of the coupling. It is suitable for the transmission shaft system connecting two concentric shafts, and has the performance of relatively compensating the relative displacement of the two shafts.Its structure is shown in Figure XNUMX. It is composed of main parts such as inner gear ring, gear shaft sleeve and end cover. Generally, small-sized gear coupling end cover and inner gear ring can be integrated. ...The structure and application range of slider couplingThe slider coupling is also known as the metal cross slider coupling. Its slider is in the shape of a ring and is made of steel or alloy. The cross slider coupling is suitable for transmissions with low speed and large transmission torque.The slider coupling is composed of two shaft sleeves and a slider. ...