DC MOTOR PUMP GROUP 1
Basic Description
Consisting of a hefty duty DC motor along with the CB1S gear pump, this pump motor group is definitely an perfect hydraulic energy unit for mobile hydraulic equipments, this kind of as car or truck carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP 2
Common Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and examine valve.
DC MOTOR PUMP GROUP three
General Description
This motor pump consists of a four.5″ DC motor and a CBSR gear pump that has a common energy up/gravity down circuit using a relief valve, a verify valve and also a solenoid release valve.
Special Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic parts concerned prior to mounting the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~68 cst, which must also be clean and no cost of impurities. N46 hydraulic oil is proposed.
4. The energy unit need to be mounted horizontally.
5. The relief valve strain is preset about 25% greater compared to the operating strain.
6. Flow manage valve for lowing speed adjustment is obtainable unpon request.