This power unit attributes a everlasting magnet motor by using a energy up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing motion is activated by the solenoid valve with all the decreasing speed controlled by the pressure compensated movement control valve. Products of this series may be extensively used in the field of logistic devices this kind of as fork lift, mini lift table, and so forth.
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean every one of the hydraulic parts concerned in advance of set up of the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and free of charge of impurities. N46 hydraulic oil is encouraged.
four. This electrical power unit is intended to be mounted vertically.
5. Check the oil level within the tank just after the primary star on the power unit.
six. Oil shifting is needed after the first a hundred operation hrs,afterwards as soon as just about every 3000 hours.
7. More pump sizes and tank sizes are avaiable on request.