one.A connecting website link of an O-ring Chain for standard application is pre-coated with grease in the pins. Ahead of connection, verify the grease on the surfaces of pins, and in case the level of grease is compact, apply grease with bare hands. (If gloves are applied, the grease might be absorbed from the gloves.)
Example: Once the connecting link (I) of an O-ring chain for general application is
shipped, O-rings are fitted with the roots on the pins. Should the O-rings come loose resulting from vibration for the 
duration of transport, refit the O-rings in to your roots of the pins.
In this instance, you’ll want to return the grease collected on the roots on the pins to the central surfaces from the pins, a lot more at portion A than at portions B proven inside the over illustration. (Portions A is worn as a result of sliding together with the bushings.)
2.The chain is often most quickly linked over the teeth of the sprocket. Engage the hyperlinks at both ends from the chain using the sprocket teeth and fit connecting pins. In case the sprocket is often moved, the chain may also be connected around the loosened side.
3. Connecting method
one.Confirm that O-rings are attached to the roots from the pins.
two.If your quantity of grease applied on the connecting pins is small, coat the pins with grease with the central portions.
3.Insert the connecting pins to the bushings on the inner back links at each ends.
four.Verify the grease is applied to the total face of your O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins into the connecting plate and though pressing the connecting plate, install the spring clip. Confirm irrespective of whether the head (the end without a split) of the spring clip is turned in the feeding course on the chain. (See the following illustration.)
six.You’ll want to confirm the spring clip is securely fitted in the clip grooves with the connecting pins.
This completes jointing with the connecting link. Note that grease on the surfaces of connecting pins and O-rings can be eliminated throughout installation operate. In this case, re-grease employing the grease to the surface on the base chain or even the grease during the polyethylene bag in which the connecting hyperlink was contained.
