Highest dress in resistance obtainable by sealing grease in between pins and bushings
The sturdiness of chain is dramatically enhanced due to the fact grease is sealed amongst the pins and bushings by O-rings. The O-ring chain is definitely the most reliable model from the Greatest Existence Chain Series with its fantastic wear resistance even during the problems or environments wherever chain maintenance is hard.
Proposed employs.
?Situations exactly where frequent chain replacement is required as a 
result of wear stretch
?Circumstances where lubrication through the service is impossible
?In an atmosphere with significantly soil, sand, dust, and so on.
?Applications that need power higher than that of the sintered bushing roller chain
Other characteristics
?Decreasing noise. (The noise level is three dB lower compared to common roller chains.)
?Minimizing vibration with the friction developed by O-Ring. (The power reduction because of the friction is nearly negligible, because the frictional force among the pins and bushings is for usually inside the applications.)
Selection of chains
The strength of an O-ring chain is nearly exactly the same as that of a regular roller chain. (Because the pins are longer than individuals of standard roller chain, the typical rupture power is somewhat reduced.)
For picking out a suitable chain, refer to “Selection of Chains” .
Once the support ambient temperature is larger than 80° C, distinctive heat resistant O-rings has to be utilized. In this instance, get hold of us for a lot more information and facts.
Connecting back links and offset links
Two sorts of connecting backlinks can be found: clearance match and interference match. When substantial strength or durability is needed, use interference-fit connecting link. Only 2POJ is available as the offset hyperlink for all sizes.
Sprockets
O-ring chain makes use of longer pins than a typical roller chain. When employing multiplex O-ring chain, the standard sprocket for multiplex chains cannot be utilized.
Caution
O-ring chain is not really advisable in applications the place solvents or other substances may assault “Nitric Rubber”. Specific materials O-rings may also be offered for these ailments: Please seek the advice of us for particulars. On the whole, “Nitric Rubber” is broken by contact with all the following chemical materials.
